Foundry Photo Gallery

Click to view each individual gallery to view part examples with details including material, manufacturing process, machining description, secondary operation and special features.

Ductile Iron Photo Gallery

adjuster_collar_8.jpg

Ductile Iron Adjuster Collar 8lbs.

  • Material: Ductile 80-55-06, ASTM A536
  • Produced On: Sinto 20 x 24
  • Machining Description: Mori Seiki MH 5000
  • Secondary Operation: Bearing cup pressed in
brake_spider_14.jpg

Ductile Iron Brake Spider 14lbs

  • Material: Ductile 80-55-06, SAE J434
  • Produced On: Sinto 20 x 24
  • Machining Description: Machined on Mori Seiki SH-630
  • Special Features: Base casting is machined into 80+ different variations. Inventory control program ensures short lead-times.
connection_5.jpg

Ductile Iron Connection 5 lbs

  • Material: Ductile 65-45-12, ASTM A536
  • Produced On: Sinto 14 x 19
  • Machining Description: Oil hole machined with drill press
  • Special Features: Cored holes held at tight tolerance to eliminate machining.
crankshaft_3.jpg

Ductile Iron Crankshaft 3lbs.

  • Material: Ductile 65-45-12, ASTM A536
  • Produced On: Sinto 20 x 24
  • Machining Description: Journals machined on dedicated equipment
  • Secondary Operation: Induction Hardened
gear_housing_15.jpg

Ductile Iron Gear Housin 15lbs.

  • Material: Ductile 65-45-12, SAE J434
  • Produced On: Cope and Drag
  • Secondary Operation: E-Coat
handle_2.jpg

Ductile Iron Handel 2 lbs.

  • Material: Ductile 80-55-06, ASTM A536
  • Produced On: Hunter 20 x 24
  • Machining Description: Machined on Mori Seiki SH-630
  • Special Features: Casting design required use of a tie bar to resist warping.
link_pin_4.jpg

Ductile Iron Link Pin 4lbs.

  • Material: ADI Grade 1, ASTM A897
  • Produced On:B&P 16x20
  • Machining Description: No Machining - Tolerance held as-cast
  • Secondary Operation: ADI Heat Treat
  • Special Features: Converted from Fabrication for cost savings.
pillow_block_6.jpg

Ductile Iron Pillow Block 6lbs.

  • Material: 65-45-12, ASTM A536
  • Produced On: Hunter 14 x 19
piston_cover_2.jpg

Ductile Iron Shift and Hub Assembly 9lbs.

  • Material: 65-45-12,
  • ASTM A536
  • Produced On: Hunter 20 x 24
  • Machining Description: Machined on a Mori Seiki MH40
  • Secondary Operation: Special Features: Micro finish of inside bore is critical to component function
shaft_hub_9.jpg

Ductile Iron Shift and Hub Assembly 9lbs.

  • Material: 100-70-03, ASTM A536
  • Produced On: Disa Forma
  • Machining Description: Okuma MA600
ASTM A536 100-70-03 Slack Adjuster 7 Pounds.JPG

Ductile Iron ASTM A536 Slack Adjuster 7lbs.

  • Material: 80-55-06, ASTM A536
  • Produced On: Sinto 20 x 24
  • Machining Description: Okuma MA600
  • Secondary Operation: E-Coat
  • Special Features:Foundry supplies overflow machining service during high volume usage
ASTM A536 65-45-12 Ductile Iron Axle Tube 8 Pounds.JPG

Ductile Iron ASTM A536 Axle Tube 8lbs

  • Material: 60-40-18, ASTM A571
  • Produced On: Sinto 20 x 24
  • Secondary Operation: E-Coat / Anneal
  • Special Features: Annealed on-site to reduce lead-time
ASTM A536 65-45-12 Connecting Rod 5 Pounds.JPG

Ductile Iron ASTM A536 Conecting Rod 5 lbs.

  • Material: 80-55-06, ASTM A536
  • Produced On: Hunter 20 x 24
ASTM A536 80-55-06 Ductile Iron Anchor Head 30 Pounds.JPG

Ductile Iron ASTM A536 Anchor Head 30 lbs.

  • Material: 80-55-06, ASTM A536
  • Produced On: Sinto 20 x 24
  • Machining Description: Holes reamed / Zerk fitting tapped
ASTM A897 Grade 1 Ductile Iron Nut 1 pound.JPG

Ductile Iron ASTM A897 Grade 1 Iron Nut 1 lb.

  • Material: 80-55-06, ASTM A536
  • Produced On: Sinto 14 x 19
  • Special Features:Threads are cast into part instead of post machined.
Ductile_Iron_Trumpet_Arm_Ca.jpg

Ductile Iron Trumpet Arm Castings 250 pounds

  • Material: 80-55-06, ASTM A536
  • Produced On: Sinto 48 x 48
Ductile_Iron_Cast_Link_Cast.jpg

Ductile Iron Cast Link Castings 275 pounds

  • Material: 80-55-06, ASTM A536
  • Produced On: Sinto 48 x 48
Ductile_Iron_Pintle_Hook_Ca.jpg

Ductile Iron Swing Frame Castings 175 pounds

  • Material: 65-45-12, ASTM A536
  • Produced On: Sinto 48 x 48

Gray Iron Photo Gallery

bearing_retainer.jpg

Grey Iron Bearing Retainer 1lbs

  • Material: Class 30 gray iron, ASTM A48
  • Produced On: Disa-Matic
  • Machining Description: Machined on Mazak
compressor_bdy18.jpg

Grey Iron Compressor Body 18 lbs

  • Material: Class 30 gray iron, ASTM A48
  • Produced On: Disa-Matic
compression_cylinder3.jpg

Grey Iron Compressor Cylinder 3 lbs

  • Material: Class 30 gray iron, ASTM A48
  • Produced On: Disa- Matic
cover_6.jpg

Grey Iron Cover 6 lbs

  • Material: Class 35 gray iron, ASTM A159
  • Produced On: Disa Forma

gear_houseing_12.jpg

Grey Iron Gear Housing 12 lbs

  • Material: Class 30 gray iron, SAE J431
  • Produced On: Cope and Drag
  • Secondary Operation: e-coat
geared_flange.jpg

Grey Iron Geared Flange 6 lbs

  • Material: class 25 gray iron, ASTM A48
  • Produced On: Disa-Matic
  • Special Features: Gear teeth casted into part
valve_retainer_8.jpg

Grey Iron Valve Retainer 8 lbs

  • Material: Class 35 gray iron, ASTM A48
  • Produced On: Hunter 20 x 24
  • Secondary Operation: e-coat
housing_ext_6.jpg

Grey Iron Housing Extension 6 lbs

  • Material: class 30 gray iron, SAE J431
  • Produced On: Sinto 20 x 24
Grey_Iron_Cast_Wheel_Castin.jpg

Grey Iron Cast Wheel Castings 350 pounds

  • Material: Class 30, ASTM A48
  • Produced On: Sinto 48 x 48
Grey_Iron_Gear_Case_Casting.jpg

Grey Iron Gear Case Castings 375 pounds

  • Material: Class 30 ASTM A48
  • Produced On: Sinto 48 x 48

Steel Castings Photo Gallery

1030 Steel Bearing Cap Casting 4 pounds.jpg

1030 Bearing Cap Casting 4 lbs.

WCB Steel Cast Cover 3 Pounds.jpg

WCB Cast Cover 3 lbs.

HK Steel Casting 30 Pounds.jpg

HK Casting 30lbs.

1045 Steel Body Casting 20 Pounds.jpg

1045 Body Casting 20 lbs.

304 Stainless Steel Cast Link 15 Pounds.jpg

304 Cast Link 15 lbs.