|
|
Ductile Iron Adjuster Collar 8lbs. |
Ductile Iron Brake Spider 14lbs |
| Material: |
Ductile 80-55-06,
ASTM A536
|
| Produced On: |
Sinto 20 x 24 |
| Machining Description: |
Mori Seiki MH 5000 |
| Secondary Operation: |
Bearing cup pressed in |
|
| Material: |
Ductile 80-55-06,
SAE J434
|
| Produced On: |
Sinto 20 x 24 |
| Machining Description: |
Machined on Mori Seiki SH-630 |
| Special Features: |
Base casting is machined into 80+ different variations. Inventory control program ensures short lead-times. |
|
|
|
|
Ductile Iron Connection 5 lbs
| Material: |
Ductile 65-45-12, ASTM A536
|
| Produced On: |
Sinto 14 x 19 |
| Machining Description: |
Oil hole machined with drill press |
| Special Features: |
Cored holes held at tight tolerance to eliminate machining. |
|
Ductile Iron Crankshaft 3lbs.
| Material: |
Ductile 65-45-12, ASTM A536
|
| Produced On: |
Sinto 20 x 24 |
| Machining Description: |
Journals machined on dedicated equipment |
| Secondary Operation: |
Induction Hardened |
|
|
|
|
Ductile Iron Gear Housin 15lbs.
| Material: |
Ductile 65-45-12, SAE J434
|
| Produced On: |
Cope and Drag |
| Secondary Operation: |
E-Coat |
|
Ductile Iron Handel 2 lbs.
| Material: |
Ductile 80-55-06, ASTM A536
|
| Produced On: |
Hunter 20 x 24 |
| Machining Description: |
Machined on Mori Seiki SH-630 |
| Special Features: |
Casting design required use of a tie bar to resist warping. |
|
|
|
|
Ductile Iron Link Pin 4lbs.
| Material: |
ADI Grade 1,
ASTM A897
|
| Produced On: |
B&P 16x20 |
| Machining Description: |
No Machining - Tolerance held as-cast |
| Secondary Operation: |
ADI Heat Treat |
| Special Features: |
Converted from Fabrication for cost savings. |
|
Ductile Iron Pillow Block 6lbs.
| Material: |
65-45-12,
ASTM A536
|
| Produced On: |
Hunter 14 x 19 |
|
|
|
|
Ductile Iron Shift and Hub Assembly 9lbs.
| Material: |
65-45-12,
ASTM A536
|
| Produced On: |
Hunter 20 x 24 |
| Machining Description: |
Machined on a Mori Seiki MH40 |
| Secondary Operation: |
|
| Special Features: |
Micro finish of inside bore is critical to component function |
|
Ductile Iron Shift and Hub Assembly 9lbs.
| Material: |
100-70-03,
ASTM A536
|
| Produced On: |
Disa Forma |
| Machining Description: |
Okuma MA600 |
|
|
|
 |
Ductile Iron ASTM A536 Slack Adjuster 7lbs.
| Material: |
80-55-06,
ASTM A536
|
| Produced On: |
Sinto 20 x 24 |
| Machining Description: |
Okuma MA600 |
| Secondary Operation: |
E-Coat |
| Special Features: |
Foundry supplies overflow machining service during high volume usage |
|
Ductile Iron ASTM A536 Axle Tube
8 lbs.
| Material: |
60-40-18,
ASTM A571
|
| Produced On: |
Sinto 20 x 24 |
| Secondary Operation: |
E-Coat / Anneal |
| Special Features: |
Annealed on-site to reduce lead-time |
|
|
 |
 |
Ductile Iron ASTM A536
Conecting Rod 5 lbs.
| Material: |
80-55-06,
ASTM A536
|
| Produced On: |
Hunter 20 x 24 |
|
Ductile Iron ASTM A536 Anchor
Head 30 lbs.
| Material: |
80-55-06,
ASTM A536
|
| Produced On: |
Sinto 20 x 24 |
| Machining Description: |
Holes reamed / Zerk fitting tapped |
|
|
 |
|
Ductile Iron ASTM A897 Grade
1 Iron Nut 1 lb.
| Material: |
80-55-06,
ASTM A536
|
| Produced On: |
Sinto 14 x 19 |
| Special Features: |
Threads are cast into part instead of post machined. |
|
|
